How to Create a Marking Label for Portable Multiple Socket Outlets and Adaptors According to CE Standards
Key Information for Marking Labels
According to the CE standard (DIN VDE 0620-2-1:2016/A1:2017), portable multiple socket outlets and adaptors must include specific warnings and technical details on the marking label to ensure safety and regulatory compliance. Below are the key elements that must be present:
1. CE Marking
- The CE mark must be visible, legible, and indelible on the product. It signifies that the product complies with all relevant safety regulations and standards set by the European Union.
- Minimum size: 5mm in height.
2. Technical Specifications
- Rated Voltage: The voltage rating must be displayed to indicate the operational range of the device.
- Example: "250V~"
- Rated Current: The current capacity in amperes (A) that the device can handle.
- Example: "16A"
- Nature of Supply: Indicate the type of current (AC or DC) with the appropriate symbol (for AC:
~).- Example: "250V~, 16A"
3. Manufacturer Information
- The marking must include the manufacturer’s name or trademark as well as the contact information (either on the product or the packaging).
- Example: "Manufacturer: Ningbo Howdy Imp & Exp Co., Ltd."
- Address: ****
4. Warnings
For portable multiple socket outlets, the following warnings must be included on the product or packaging:
-
Do not connect after each other:
- Warning about daisy-chaining multiple sockets to prevent overload and fire hazards.
- Example: "Do not connect after each other (Nicht hintereinanderstecken)"
-
Do not cover when in use:
- Prevents overheating by ensuring proper ventilation.
- Example: "Do not cover when in use (Nicht abgedeckt betreiben)"
For portable multiple socket outlets with a functional switch, an additional warning is required:
- To disconnect voltage, pull the plug:
- This informs the user that turning off the switch does not fully disconnect the device from the power source.
- Example: "To disconnect voltage, pull the plug (Spannungsfrei nur bei gezogenem Stecker)"
For adaptors, the following warning must be included:
- Do not connect after each other:
- Example: "Do not connect after each other (Nicht hintereinanderstecken)"
5. IP Rating (If Applicable)
If the product is rated for a certain level of water or dust resistance, the IP code (Ingress Protection) must be displayed.
- Example: "IP20" (for indoor use only)
Additional Requirements for Adaptors and Multiple Socket-Outlets
Durability of Marking
- The marking must be durable and legible even after being subjected to wear and tear, including exposure to water and cleaning agents. It must pass tests for resistance to abrasion and chemicals, ensuring that the marking stays intact over time.
Marking Size
- The marking should be at least 3mm in height, ensuring clarity and legibility without the need for visual aids.
